Anycubic Kobra 2 Pro

Name: Anycubic Kobra 2 Pro
Brand: Anycubic
Availability: InStock

The Kobra 2 Pro is the fast one in Anycubic's Kobra 2 family, rated at up to 500 mm/s with 300 mm/s as the everyday speed. The bed is 220 x 220 mm with 250 mm of height. It's a bed slinger with a dual-gear direct-drive extruder, a 260 °C hotend and a 110 °C bed, so PLA, PETG, TPU and ABS are all on the list. Prints land on a magnetic PEI spring-steel sheet, and the LeviQ 2.0 system probes 25 points and sets the nozzle height itself, which takes the fiddliest job off a beginner's plate. The Kobra 2 name covers several machines, including the Neo, Plus and Max, so check the listing says Pro. As a first printer it's capable. Look for a clean recent print and a sheet with life left.

Kobra 2 Pro (the Kobra 2 Neo, Plus and Max are different machines)

Representative photo, made by AI from real seller photos. Every listing differs. How we make these →

Spec at a glance

Maker: Anycubic
Type: FDM, Bed slinger
Build volume: 220 x 220 x 250 mm
Extruder: Direct drive with dual gears, 0.4 mm nozzle
Max temperatures: Hotend 260 °C, bed 110 °C
Bed: Magnetic PEI spring-steel sheet
Levelling: LeviQ 2.0, 25-point automatic with smart Z offset
Speed: Up to 500 mm/s, 300 mm/s typical
Also listed as: Kobra2 Pro, Kobra 2Pro
Typical eBay ask (Oct 19, 2026): $140–$460

Printer check

Hours, hotend, bed and firmware

Print hours: We couldn't find a total print-time counter in Anycubic's documentation for the Kobra 2 Pro. Ask the seller roughly how much it has printed, then let the nozzle, the sheet and a recent print tell you the rest.
Hotend and nozzle: It's a direct-drive extruder with dual gears and a replaceable 0.4 mm nozzle, rated to 260 °C. Ask for a close photo of the nozzle tip and the gears. A clean, round tip and gears free of filament dust are what you want.
Bed and levelling: Prints go on a magnetic PEI spring-steel sheet, and the LeviQ 2.0 system probes 25 points and sets the Z offset for you. Look at the sheet in the photos. Shiny bald patches or deep gouges mean prints will stop sticking there, and a new sheet is the fix.
Belts, rails and screws: It's a bed slinger, with belt tensioners included for the X and Y belts and a twin threaded-rod Z axis. Ask the seller to push the bed and the head by hand with the power off. Both should glide without grinding or play.
Firmware and account: Anycubic says app control needs firmware 3.0.5 or later. Ask which version it runs, and whether the seller has linked it to their Anycubic app account, so they can remove it before it ships.
Spare parts: Nozzles and PEI sheets are ordinary wear parts. We didn't confirm a Kobra 2 Pro spare-parts page in Anycubic's store, so check the store for the part you need before you count on it.
Shipping and packaging: Anycubic's only shipping note is that transport can shift the Z offset, so plan to reset it when it arrives. Ask the seller to pack it in the original foam, with the sheet off and the head and bed taped still, and look for a bent frame or cracked screen.

Should come with it

The PEI spring-steel sheet
Power cable and the spool holder
The tool kit and spare nozzle, if the seller still has them

Check the listing photos against these lists, and ask the seller about anything you can’t see. A missing sheet, add-on or power supply should come off the price.

What to check

Anycubic lists no Kobra 2 Pro faults, so judge it on the wear parts. On any fast bed slinger the nozzle, the PEI sheet and the belts take the most wear, and all three show up in a recent print.

01Model name: Check the title and the label on the printer say Kobra 2 Pro. The Neo, Plus and Max are different printers.
02Recent print: Ask for a photo of a recent print with its first layer facing up. Even lines with no gaps or ridges mean the levelling and extruder are working.
03Nozzle: Ask for a close photo of the nozzle tip. A clean, round opening is good, and a flattened or crusted tip needs replacing.
04PEI sheet: Look at the sheet in the listing photos. A matte, even surface is good, while bald or gouged patches mean a new sheet.
05Belts: Ask the seller to pluck the X and Y belts. Each should feel taut and twang, not flap.
06Firmware: Ask which firmware version it runs. Anycubic's app needs 3.0.5 or later.
07Packing: Ask how it'll be packed. The sheet should come off and the head and bed should be held still.

New to used printers? How to check a used 3D printer covers hours, nozzles, beds, belts and shipping damage, and accounts, firmware and cloud binding covers what the seller should sort out before it ships.

Buying guide

Which one to buy

§ Oct 19, 2026

Kobra 2 Pros are thin on the ground, with only a handful listed, so the $140 to $460 band doesn't say much. The one at $294 delivered is the pick. Anycubic gives it no print-hour counter, so ask how much it's printed, and check the PEI sheet for bald or gouged patches. The $143 one could undercut it once the seller quotes shipping.

Listed now: 5
For parts: 0
Typical ask: $140–$460
Full range: $140–$415

Cheapest
$293.79est. delivered
Cheapest from a seller with a real track record. The title is copied spec text, so ask for photos of this printer, its nozzle and the sheet.
Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing
View on eBay ↗: Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing$293.79 est. delivered
Best value
$293.79est. delivered
Mid-band for a Kobra 2 Pro. Have the seller take it off their Anycubic app account before it ships.
Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing
View on eBay ↗: Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing$293.79 est. delivered

Delivered prices include shipping as eBay quoted it to a US address on Oct 19, 2026. Many sellers charge by distance, so your total may differ. eBay shows yours before you pay.

Snapshot

For sale on eBay

5 of 5 listed

Checked Oct 19, 2026. Some may have sold.

Delivered prices include shipping as eBay quoted it to a US address on Oct 19, 2026. Many sellers charge by distance, so your total may differ. eBay shows yours before you pay.

Used
- Cheapest
- Best value
Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing
$293.79est. delivered
$199.99 + $93.80 shipping
Buy It Now$199.99
Offers accepted
This seller takes offers, and many sellers accept less than the asking price.
Fine if you might miss it? Send an offer first. Someone else can still buy it while you wait for a reply.
Want it for sure? Use Buy It Now.
Good buy
Spec-copy title. Ask for photos of this printer.
Seller: diamondgirldealz
99.8% positive
View on eBay ↗: Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing
Used
Anycubic Kobra 2 Pro 3D Printer
$459.68est. delivered
$414.72 + $44.96 shipping
Buy It Now$414.72
Our take
Top ask here, $460 delivered.
Seller: nicipi_0
100% positive
View on eBay ↗: Anycubic Kobra 2 Pro 3D Printer
Used
ANYCUBIC KOBRA 2 PRO (P11032335)
$143.00+ shipping
$143.00 · shipping not stated
Buy It Now$143.00
Offers accepted
This seller takes offers, and many sellers accept less than the asking price.
Fine if you might miss it? Send an offer first. Someone else can still buy it while you wait for a reply.
Want it for sure? Use Buy It Now.
Our take
Pawn shop listing at $143 with no shipping quoted. Get a delivered price first.
Seller: pawn1_caldwell
99.6% positive
View on eBay ↗: ANYCUBIC KOBRA 2 PRO (P11032335)
Used
- Check the seller
ANYCUBIC Kobra 2 Pro FDM 3D Printer Touchscreen 500mm/s 220x220x250mm
$277.73est. delivered
$170.00 + $107.73 shipping
Buy It Now$170.00
Offers accepted
This seller takes offers, and many sellers accept less than the asking price.
Fine if you might miss it? Send an offer first. Someone else can still buy it while you wait for a reply.
Want it for sure? Use Buy It Now.
Check the seller
No feedback yet. $278 delivered.
Seller: bessellers
No feedback yet
View on eBay ↗: ANYCUBIC Kobra 2 Pro FDM 3D Printer Touchscreen 500mm/s 220x220x250mm
Used
- Check the seller
Anycubic Kobra 2 Pro FDM
$287.30est. delivered
$140.00 + $147.30 shipping
Buy It Now$140.00
Offers accepted
This seller takes offers, and many sellers accept less than the asking price.
Fine if you might miss it? Send an offer first. Someone else can still buy it while you wait for a reply.
Want it for sure? Use Buy It Now.
Check the seller
No feedback yet, and $147 to ship.
Seller: isasm_3237
No feedback yet
View on eBay ↗: Anycubic Kobra 2 Pro FDM

Prices change daily. The live eBay search shows everything listed now, including anything new since Oct 19, 2026.

See every listing on eBay ↗eBay search

Compare with

Keep exploring

Brand

Type

Read

Anycubic Kobra 2 Pro

Kobra 2 Pro (the Kobra 2 Neo, Plus and Max are different machines)

Spec at a glance

Maker

Anycubic

Type

FDM, Bed slinger

Build volume

220 x 220 x 250 mm

Extruder

Direct drive with dual gears, 0.4 mm nozzle

Max temperatures

Hotend 260 °C, bed 110 °C

Bed

Magnetic PEI spring-steel sheet

Levelling

LeviQ 2.0, 25-point automatic with smart Z offset

Speed

Up to 500 mm/s, 300 mm/s typical

Also listed as

Kobra2 Pro, Kobra 2Pro

Typical eBay ask (Oct 19, 2026)

$140–$460

Hours, hotend, bed and firmware

Print hours

We couldn't find a total print-time counter in Anycubic's documentation for the Kobra 2 Pro. Ask the seller roughly how much it has printed, then let the nozzle, the sheet and a recent print tell you the rest.

Hotend and nozzle

It's a direct-drive extruder with dual gears and a replaceable 0.4 mm nozzle, rated to 260 °C. Ask for a close photo of the nozzle tip and the gears. A clean, round tip and gears free of filament dust are what you want.

Bed and levelling

Prints go on a magnetic PEI spring-steel sheet, and the LeviQ 2.0 system probes 25 points and sets the Z offset for you. Look at the sheet in the photos. Shiny bald patches or deep gouges mean prints will stop sticking there, and a new sheet is the fix.

Belts, rails and screws

It's a bed slinger, with belt tensioners included for the X and Y belts and a twin threaded-rod Z axis. Ask the seller to push the bed and the head by hand with the power off. Both should glide without grinding or play.

Firmware and account

Anycubic says app control needs firmware 3.0.5 or later. Ask which version it runs, and whether the seller has linked it to their Anycubic app account, so they can remove it before it ships.

Spare parts

Nozzles and PEI sheets are ordinary wear parts. We didn't confirm a Kobra 2 Pro spare-parts page in Anycubic's store, so check the store for the part you need before you count on it.

Shipping and packaging

Anycubic's only shipping note is that transport can shift the Z offset, so plan to reset it when it arrives. Ask the seller to pack it in the original foam, with the sheet off and the head and bed taped still, and look for a bent frame or cracked screen.

Should come with it

The PEI spring-steel sheet

Power cable and the spool holder

The tool kit and spare nozzle, if the seller still has them

Check the listing photos against these lists, and ask the seller about anything you can’t see. A missing sheet, add-on or power supply should come off the price.

What to check

Anycubic lists no Kobra 2 Pro faults, so judge it on the wear parts. On any fast bed slinger the nozzle, the PEI sheet and the belts take the most wear, and all three show up in a recent print.

01Model name: Check the title and the label on the printer say Kobra 2 Pro. The Neo, Plus and Max are different printers.

02Recent print: Ask for a photo of a recent print with its first layer facing up. Even lines with no gaps or ridges mean the levelling and extruder are working.

03Nozzle: Ask for a close photo of the nozzle tip. A clean, round opening is good, and a flattened or crusted tip needs replacing.

04PEI sheet: Look at the sheet in the listing photos. A matte, even surface is good, while bald or gouged patches mean a new sheet.

05Belts: Ask the seller to pluck the X and Y belts. Each should feel taut and twang, not flap.

06Firmware: Ask which firmware version it runs. Anycubic's app needs 3.0.5 or later.

07Packing: Ask how it'll be packed. The sheet should come off and the head and bed should be held still.

Anycubic Kobra 2 Pro

Spec at a glance

Hours, hotend, bed and firmware

What to check

Which one to buy

For sale on eBay

Anycubic 3D Printer Kobra 2 Pro 500mm/s High-Speed Printing High Power Computing